RockAUTO Setup AutoCAD

INSTALLATION INSTRUCTIONS

  1. Install RockAUTO using the setup program provided.
  2. Select the CAD Application to install and press 'Configure'.

PLEASE REMEMBER THAT HELP IS ONLY A PHONE CALL OR EMAIL AWAY.

UPGRADE / UN-INSTALLATION INSTRUCTIONS

  1. THE FIRST STEP IS THAT YOU NEED TO UNLOAD RockAUTO
  2. AT THE COMMAND PROMPT TYPE 'OPTIONS' or 'OP' AND PRESS ENTER.
  3. GOTO THE 'Files' TAB AND CLICK ON 'Support File Search Path'.
  4. REMOVE ANY FOLDER WHICH POINTS TO A ROCKAUTO FOLDER: Eg
    "....\RockAUTO\Support"
    "....\RockAUTO\Support\Hatch Patterns"
    "....\RockAUTO\Blocks"
    and:
    "....\RockAUTO\Support 20##"
  5. AT THE COMMAND PROMPT TYPE 'MENUUNLOAD' TO UNLOAD THE FOLLOWING MENU CUSTOMISATIONS.

ROCKAUTO
AUTOARCH
AUTOELEC
AUTOFIRE
AUTOPID
AUTOISO
AUTOHVAC
AUTOPIPE
AUTOSTRU
NUMPADSNAPS
ACADLAYERS
AUTOPUBLISH
AUTOLIB
AUTOLIB_BLOCKS
ANY OTHER AUTOLIB

  1. EXIT AND RE-ENTER AutoCAD.


RockAUTO Setup Bricscad

INSTALLATION INSTRUCTIONS

  1. Install RockAUTO using the setup program provided.
  2. Select the CAD Application to install and press 'Configure'.

PLEASE REMEMBER THAT HELP IS ONLY A PHONE CALL OR EMAIL AWAY.

UPGRADE / UN-INSTALLATION INSTRUCTIONS

  1. THE FIRST STEP IS THAT YOU NEED TO UNLOAD RockAUTO
  2. AT THE COMMAND PROMPT TYPE 'SETTINGS' or 'SE' AND PRESS ENTER.
  3. NAVIGATE TO ‘PROGRAM OPTIONS’ > ‘FILES’ AND CLICK ON 'Support File Search Path'.
  4. REMOVE ANY FOLDER WHICH POINTS TO A ROCKAUTO FOLDER: Eg
    "....\RockAUTO\Support"
    "....\RockAUTO\Support\Hatch Patterns"
    "....\RockAUTO\Blocks"
    and:
    "....\RockAUTO\Bricscad V9 "
  5. AT THE COMMAND PROMPT TYPE 'MENUUNLOAD' TO UNLOAD THE FOLLOWING MENU CUSTOMISATIONS.

ROCKAUTO
AUTOARCH
AUTOELEC
AUTOFIRE
AUTOPID
AUTOISO
AUTOHVAC
AUTOPIPE
AUTOSTRU
NUMPADSNAPS
ACADLAYERS
AUTOPUBLISH
AUTOLIB
AUTOLIB_BLOCKS
ANY OTHER AUTOLIB

  1. EXIT AND RE-ENTER BRICSCAD.